For technical specifications, dimensions and ordering codes for the below products refer to the DYNACOOL DC200 Catalogue.




 Electric Thermostatic Fan Controls

Pictured at left is our 123W wet brass probe type thermostat for heat exchanger or tank port mounting for control of AC or DC electric motors, the JBOX type thermostatic control circuit designed for use with 3 phase electric motors and the low cost 17/DC wet switch relay kit for control of DC voltage fan motors.
Series 443 CAROUSEL filter

Lower cost than imported on-line systems currently available. Use of standard spin on elements slashes maintenance costs. Fast and reliable. Labour saving element replacement method. Only 25% of flow capacity interruption during filter replacement.
HAIGHT - Rotary Gear Positive Displacement Oil Pumps

Superior High Viscosity Rotary Gear Pump Features
Input drive at the inner gear provides a built in gear reduction which means less cavitation at standard motor speeds. The inner gear drive design also permits a bearing to be provided on either side of the drive shaft and also provides a balanced rotor design. These features make the Haight pump superior for high viscosity pumping.
9 basic model displacements are available ranging for 3.6 to 87.2 cc per rev. Drive arrangements include base mount or flange mount. All models are available with internal or external bypass relief bypass valve systems.
For full details refer to Catalogue HP1.
Modulating Valves & Bulb Wells For Shell & Tube Heat Exchangers

Several Sizes Available. These valves regulate the flow of water to the heat exchanger. The valve opens when the temperature increases at the sensing bulb. Cooling rate automatically varies to allow optimum oil temperature to be maintained. Water is conserved by reducing or stopping flow when minimum or no cooling is required.
Three way Oil Thermostatic Valves

During cold start up, total flow is through the by-pass port. Once the fluid temperature reaches the opening point, the valve begins to open and flow to the heat exchanger supply port begins. As the temperature rises the valve shifts further allowing more flow through the heat exchanger supply port and less to the by-pass port. When the fully shifted temperature is reached the valve is fully stroked and all flow is directed to the heat exchanger port.
Oil Heat Exchanger Computer Model Selection Program

The latest version of our Dynacool heat exchanger computer selection program now provides quick and accurate selection of most of our standard models of air cooled package exchangers, mobile air cooled and water cooled models. A new easy find instruction manual is now also available.